Building a Patio Posts

If you want to read all 6 patio building posts in order, here are the links to the posts, in chronological order:

Building a Patio - Part 1
Building a Patio - Part 2
Building a Patio - Part 3
Building a Patio - Part 4
Building a Patio - Part 5
Building a Patio - Part 6

Building a Patio - Part 6

In my previous posts I've described the excavation process, laying the limestone and sand, placing the edging, and a bunch of missteps and lessons along the way. Now, after all the work it was finally time to lay the pavers.

The pavers we chose were a mix of 6"x6" and 6"x9" concrete pavers. This meant that we needed a pattern that would work, and look good, with the multiple sizes. We chose to go with a herringbone-type pattern with a soldier pattern along all edges of the patio.

Laying the first paver was a great feeling.


The line in the sand in the photo below was left behind when we pulled out the PVC pipe that we used to lay the 1 in. of sand. As I mentioned before, you don't have to fill that hole in all at once. Just fill it in as you go. It's much easier that way and it ensures that you're not walking on the sand.

We laid pavers down one complete edge of the patio and then started working inwards.



But...as I laid the pavers I really wanted them to be level. That turned into my biggest mistake of the project. I started checking each, individual paver with a torpedo level. This caused two issues:

1. I ended up making things less level instead of more level by "fixing" each and every paver.
2. I put my knees through hell squatting down 5-10 times for every paver.

After laying about 100 pavers, I knew that I was not doing this step correctly. There is no way that professional pavers did it this way; it would take them forever to finish a job. That's when I just decided to just lay each paver and not worry about leveling it. Wow, what a difference. I completed half the patio (about 450 more pavers) in the same amount of time it took me to lay the first 50 pavers.


TIP: If you have laid your crushed stone and sand correctly, just lay the pavers. Don't try to level every paver individually. It will take a LONG time and you'll end up actually making things unlevel.

Within a few more hours, the patio was almost complete!


Following the completion of laying the pavers, we laid the remaining paver edging. Remember that previously I recommended only laying two sides of the edging to start. You can put the rest down at the end once you know exactly where the patio edges are.


The last part of the project involved filling in the holes near the edge of the patio that you can see in the photo above. The way the pattern worked out there were some areas that required 3" pavers. Off to Home Depot I went and I rented a wet saw for four hours. The wet saw worked perfectly. But, I did learn something from the guy at Home Depot about how best to use the wet saw.

TIP: When using a wet saw, place the water pump in a separate bucket instead of putting the pump in the tray at the bottom of the saw. While this means that you will have to fill up the bucket and empty the saw water tray every few cuts since the water won't continuously circulate through the system, it will prevent the paver dust from flowing through, and possibly clogging up, the water pump. This was a great tip from the guy at Home Depot.

We finished the cuts and put the final pavers in place. Even though I had been putting mason sand into the cracks between the pavers throughout, now that the patio was complete, I could finally fill in the entire patio with sand.

After about 50 hours of work by myself, my wife, and Eric, the patio was complete! It was a great learning experience and it adds so much to the back of the house.

Soon afterward (meaning within days) we got a new gas grill, which I will discuss in a future posting, and a new patio set. You just can't live in a place like Orlando and not have a place to go outside and enjoy the warmth and sunshine.

Hope you enjoyed the detailed process description and that if you ever decide to undertake building a patio project yourself someday that my descriptions, pictures, and tips help you along the way. Below are some final photos of the completed patio and the obligatory before/after photos.

BEFORE



AFTER

Deal of the Month! Well...Maybe Not

I got an email the other day from Coastal Contacts. I purchased contacts from them back in December of last year because they had the best price on my Acuvue 2 lenses. The subject of the email I received said, "Coastal Contacts Dropped the Price on Your Contact Lenses." I didn't need more contacts yet, but I decided to read the body of the email. In there, it said,

We’ve just dropped the price on Acuvue 2 – get it as low as $14.74 per box! We have extra Acuvue 2 in stock, so we’re blowing out the inventory. Hurry, for a limited time you can save even more when you refill your contact lenses at Coastal Contacts!

That got me to wondering. How much did I pay for my contacts in December? I went and I took a look at my order confirmation. Total price for each box of contacts I bought? $17? $18? Nope...

$14.90 per box

I guess sending an email to people saying, "Hurry, Coastal Contacts is having a 1.07% sale on Acuvue 2 lenses!" just didn't sound as appealing as telling people that they are "blowing out the inventory."

Thanks for the great deal, Coastal Contacts.